Key Features

• Offers a variety of sizes
• Implement warning lights enable safe transport
• Shovels and attaching hardware
• Sweeps and attaching hardware

• PLOW, CHISEL John Deere 610 - PLOW, CHISEL 610 Series Chisel Plows / HYDRAULIC CYLINDERS / 3'X 8' HYDRAULIC CYLINDER (PRINCE) 3'X 8' HYDRAULIC CYLINDER (PRINCE).
• We offer disc parts to fit many of the best-selling implement brands, from Case IH ® to John Deere ®, so you can get the disc parts you need. Spare cultivator parts, of course, always come in handy so you're not wasting time with breakdowns. Keep fertilizer knives and other tillage parts in your shop and garage and be prepared for anything.

• Features
• Specifications

Features

John Deere 610 Chisel Plow Parts

610 John Deere chisel plow and 787 John Deere tow between air cart. Set up to Deep band fertilizer and apply anhydrous at the same time. Raven NH3 Cooler with 450 controller. All new hoses, valves and breakaway coupler installed this spring before use. Heavy duty rear hitch and like new summers 3.

Offers a variety of sizes and excellent residue flow

The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.

Typical percents of the residue cover that remains from the 610 are listed as follows (the percentages do not take into account variables such as the condition of the residue, speed, and soil type):

*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.

Strong mainframe withstands demanding field conditions

The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.

Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.

Choice of rigid, TruPosition™, and Tru-Depth™ standards

The rigid standard:

• Is in base equipment on three-section models
• Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
• Design is suited for fields having few obstructions
• Will till to 203 mm (8 in.) deep
• Good clearance to handle heavy trash
  • 711-mm (28-in.) underframe
  • 305-mm (12-in.) spacing

The TruPosition standard:

• Is optional on all models
• Cast pivot assembly holds shank firm while working in the soil
• Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
• Shank is replaceable without disassembly of the standard assembly
• Trip action is suited for fields having rocks or other obstructions
  • 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
  • 711-mm (28-in.) underframe
  • 305-mm (12-in.) spacing
  • Trip height of 254 mm (10 in.) for good clearance
• Slotted lower hole to aid in removing ground-engaging tools

The Tru-Depth standard:

• Is optional on drawn rigid and select drawn flexible models up to 838 mm (33 ft)
• Is 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge is bent for extra strength
• Designed to work in rocky ground and heavy draft conditions
  • Will till to 305 mm (12 in.) deep
  • Trip height of 279 mm (11 in.)
  • 568-kg (1250-lb) trip force
• Excellent clearance to handle heavy trash
  • 813-mm (32-in.) underframe
  • 305-mm (12-in.) spacing

Implement warning lights enable safe transport

An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.

The implement warning light harness requires one of the following:

• Category 2, 3-point hitch with or without Quik-Coupler

Used John Deere Chisel Plows

• Category 3 and 3N, 3-point hitch with or without Quik-Coupler

Horsepower requirements

The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.

The Tru-Depth™ standard requires engine horsepower of 6 hp per ft to 14 hp per ft.

Operator's manual storage container comes as standard equipment

A 102-mm (4-in.) diameter container provides storage to give the operator easy access to the manual at the front of the machine. It is made out of a durable polyethylene and will keep the manual clean and dry in all weather conditions.

The container was designed exclusively for John Deere and the John Deere logo is shown on the lid.

Three-bar coil-tine harrow attachment available to finish off the field

A handy three-bar coil-tine harrow attachment fits compactly behind the chisel plow.

There is 305 mm (12 in.) of fore-aft clearance between the bars plus vertical clearance of 305 mm (12 in.).

NOTE:Use the harrow attachment only on machines equipped with sweeps; do not use with the
Tru-Depth™ standard.

On Sale Now!

Don't miss these special sale prices, for a limited time only.

What's New?

View the latest news & information from SEMA Equipment.

Newsletter

Join our newsletter & you'll receive exclusive offers.
Email Address:

Career Opportunities

We're always looking for talented individuals to join our team.